Adcon A720 Guía de usuario descargar pdf (Pagina 21)

CHAPTER 2

Installation

Hostname.Domain : my840.domain.com

Nameserver IP(s) : 221.38.15.62

Timeservername or IP:

Name/IP-Address from outside a NATing router : none

Port number of web-server from outside a NATing router

: none

DHCP server running : no

Unsaved changes pending!

(C)hange/(S)ave/(D)hcp/(Q)uit configuration? [c/s/d/Q]

Type s to save your changes or q to quit the

configuration. Note that if you type q, you will be asked

if you want to keep the changes and the default answer

is Yes.

Note: If you don’t have Internet access, you can leave the gateway

and nameserver entries unchanged. The hostname will

identify the gateway in your network. However, if you have a

name server on your network, you must use the name

assigned by your administrator. If you don’t have a time

server available, either over the Internet or on your LAN,

select <none>.

• If you have only a small LAN that has no direct access to

the Internet (that is, Internet access is done through a

dial-up connection) you should use the DHCP server

feature built into the A840 Gateway. In this case, your

computers on the LAN will get their IP addresses and

other network information from the gateway (to

configure your PC to use DHCP, refer to your PC’s user

manual).

Type d to display the DHCP configuration on your

terminal:

Network Configuration

Network active : yes

IP-address : 192.168.1.2

Netmask : 255.255.255.0

Gateway : 192.168.1.1

Hostname.Domain : 192.168.1.2

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 145 146

Sin comentarios

Adcon A720 Guía de usuario Pagina 21