Adcon A720 Guía de usuario descargar pdf (Pagina 54)

addVANTAGE Pro 6.4 Administrator Guide CHAPTER 4

The Tools Menu

Disabling the Data Transfer from a Server

Follow these steps to disable the transfer of data from a specific server:

1. Select ToolsData Acquisition.

2. Select the host and click Edit to display the Properties dialog for the

selected host. (An example of such a dialog is shown in Figure 59.)

3. Select the Data acquisition schedule tab (Figure 60), then unselect the Use

schedule checkbox.

4. Click OK to close the dialog. Although disabled, you can still download data

from that host manually by selecting Tools

Get Data Fromhostname.

Reconnecting Tags

You might occasionally need to reconnect tags from one source to another, for

example, from a Telemetry Gateway to an addVANTAGE Pro server. Another

situation where you might need this feature is after exporting data from

addVANTAGE 3.46 when you want to continue to download data and append it to

the imported data.

You can reconnect RTUs when all the tags of that RTU will be reconnected to the

appropriate sensors. To reconnect an RTU:

1. Select the RTU, then right-click it.

2. Select Connect Tohostname.

3. A context menu appears, listing all the devices on that host (you may need

to expand the tree listing the RTUs).

4. Select the RTU you want to reconnect to and click OK.

You can also reconnect individual tags, if they belong to the same RTU (for

example, you switched a sensor on the RTU from one connector to the other and

did not update this change properly with the gateway’s Configurator). To

reconnect a tag, follow the steps above, except that you select and right-click

the tag in step 1, then click Connect.

When a tag is acquiring data, the icon for the tag and for the RTU will display in

the Explorer with a tiny moving arrow.

Using the RTU Creation Wizard

Adcon has a quick way to add an RTU and be sure you have configured it

properly. Follow these steps to use the RTU creation wizard:

1. In the Explorer’s toolbar, click the RTU creation wizard icon. The dialog

shown in Figure 63 appears.

Figure 63. RTU Creation Wizard, Area Page

Notice the question at the top of the dialog. It shows you that you are on

page 1 of 5 of the creation wizard.

2. Expand the nodes as needed, then select the area where you want to create

the RTU.

Note: Steps 1 and 2 are skipped if you have already selected an area for the new RTU.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 104 105

Sin comentarios

Adcon A720 Guía de usuario Pagina 54